Sandvik Materials Technology received an order for nuclear tubes and pipes from a low-carbon energy company for the development of nuclear power stations in the United Kingdom. Sandvik will supply nuclear tubes and pipes in 29 dimensions in grade 3R65, a molybdenum-alloyed austenitic stainless chromium-nickel steel with a low carbon content. The tubes will be mainly used to connect different systems close to the second reactor at the Hinkley Point C power station in Bristol, England.
Bull Moose Tube Co. (BMT), a Caparo Bull Moose subsidiary, announced plans to build a 350,000-ton-per-year pipe and tube mill on Steel Dynamics’ new Sinton, Texas, flat-rolled campus. The facility will produce sprinkler pipe and hollow structural sections (HSS) using steel from SDI’s plant. According to BMT, the mill will make product ranging in size from 4 to 14 inches square, 5 to 18 inches round, up to 80 feet long and thicknesses ranging from .187 to .750 inch. It will also expand BMT’s geographic footprint and allow the company to better serve customers in the Southwest, West Coast and Mexico markets. Company officials said they anticipate an early 2023 mill start-up.
Zekelman Industries announced the completion of exterior building work on its new mill in Blytheville, Ark., constructed for its Atlas Tube division. Foundation work has begun, and the mill is scheduled to start rolling in September 2021. Located next to one of Atlas Tube’s existing mills, the company says the 515,000-square-foot facility will be the largest continuous electric resistance welding (ERW) mill in the world, rolling HSS from 8 to 22 inches square. Rounds will be available up to 28 inches OD and rectangles up to 34 x 10 inches, with wall thicknesses up to 1 inch.
Nucor Corp. will build a new tube mill on the site of its Nucor Steel Gallatin sheet mill in Kentucky. This location will allow the company to take advantage of investments made to expand capacity of the Gallatin mill and add a galvanizing line. The $164 million project is expected to be in operation by the middle of 2023 and create more than 70 new full-time jobs. The tube mill will have the capacity to produce approximately 250,000 tons annually of hollow structural section (HSS) steel tubing, mechanical steel tubing and galvanized solar torque tube. The Gallatin County site puts the facility near expanding solar markets in the United States and the largest consuming regions for HSS steel tubing.
SMS group supplied a high-frequency tube welding line to Spain’s Bornay SL. The tube welding line enables Bornay to produce high-quality tubes with round, square or rectangular cross sections and yield points up to 1,200 MPa. It can produce tubes with diameters of 10-40 mm and wall thicknesses up to 4.5 mm. Tubes with square cross sections are manufactured in dimensions up to 30 x 30 mm and rectangular products in dimensions up to 40 x 20 mm with wall thicknesses up to 4 mm.
TMK’s Seversky Pipe Plant awarded SMS group the final acceptance certificate for a heat-treatment line for tubes and pipes at its Polevskoy site in Russia. The line has an annual capacity of up to 300,000 tons of pipes with diameters between 168 and 370 mm (6.6 and 14.5 inches), a wall thickness of up to 40 mm (1.5 inches) and lengths of up to 13.5 meters (44.3 feet). The line is able to process small batch sizes and different product groups in a cost-efficient manner.
Nova Steel USA Inc. plans to build a 108,000-square-foot tube manufacturing facility in Bowling Green, Ky. The $70 million investment is expected to create 110 full-time jobs in the coming years. The project includes purchase and installation of equipment for precision roll forming, laser cutting, tube bending, fabrication and robotics. According to Nova Steel, the facility will produce a variety of automotive parts used in the production of pickup trucks and SUVs.
According to a report, Phillips Tube Group, a welded-steel tube manufacturer, will invest $8.2 million to expand its manufacturing plant and relocate into the former Matthews International building in Richmond, Ind. The company expects to hire 30 associates by 2024. The Indiana Economic Development Corporation (EDC) offered up to $325,000 in conditional tax credits as an incentive based on the company's hiring. According to the EDC, the investment represents the most technologically advanced machinery and processing equipment in the industry.
Montreal, Quebec-based Nova Steel will open a production facility that includes two tube mills in Delta, Ohio. The facility will produce hollow structural sections (HSS) and standard pipe. Nova Steel will invest more than $70 million in the 250,000-square-foot plant and create approximately 100 new jobs. Groundbreaking will take place by mid-year, and the facility is expected to be fully operational in 2021. The company selected northwest Ohio because of its proximity to steel coil supply. Other factors include transportation advantages such as direct rail access and the heavy load limits on highways between Ohio, Michigan and Canada.
Samuel Associated Tube Group, a division of Samuel, Son & Co. (USA) Inc., plans to invest approximately $29 million and create about 50 new jobs by building a manufacturing facility in Jefferson County, Ala. The company manufactures small-diameter, electric-resistance-welded and fabricated carbon-steel tubing. The 284,000-square-foot facility will be used for the production of new business and the consolidation of other existing facilities. It will also include capacity for future growth. The facility is expected to be fully operational before Dec. 31, 2020.