Nitrex is set to start the fourth phase of expansion at its commercial heat-treating facility in Aurora, Ill. The project will add a fourth building that will house a new low-pressure carburizing (LPC) system and secondary heat-treating equipment. The ECM vacuum carburizing furnace with oil-quench capabilities will help meet growing demand from makers of high-end critical parts within the automotive, aerospace and tooling industries. The 20-bar dual-chamber furnace has a workload size of 40 inches long x 24 inches wide x 28 inches high (1,000 x 600 x 715 mm) and a load capacity of 1,500 pounds (680 kg).
Even though times – and with it technology – are constantly evolving, Industrial Heating’s directories (for the most part) remain the same. They may look different in the magazine, but their purpose never changes: to provide you with a valuable resource that can be used for the entire year.
Solar Atmospheres purchased and commissioned a Hitachi scanning electron microscope (SEM). The FlexSEM1000 II will allow the commercial heat treater to meet customer needs, such as strict requirements for low-level contamination from carbon, oxygen and/or nitrogen post heat treating. In addition, the SEM will enable Solar to fulfill materials characterization and microstructural determination requests beyond basic metallography and hardness testing. This investment is a response to the changing needs of Solar’s customers.
SECO/WARWICK delivered an all-metal high-vacuum furnace with a work-chamber size of 1,200 mm x 1,200 mm x 1,200 mm to Hauck Heat Treatment Group’s recently expanded plant in Eindhoven, Netherlands. According to the companies, it is the largest furnace of its type currently in operation in the Benelux region. It is also the third furnace SECO/WARWICK has delivered to Hauck’s Eindhoven facility. In addition, SECO/WARWICK has established a strong cooperation with Hauck’s plant in Poland, where new vacuum furnaces are scheduled to be delivered.
Ipsen USA installed a vacuum furnace at Stack Metallurgical Group’s site in Spokane Valley, Wash. Formerly known as Inland NW Metallurgical Services, Stack Spokane is one of the company’s four locations offering a range of metal-processing services. Installation of the 2-bar vacuum furnace, which will be used to process critical aerospace components, was completed in late 2019. Stack operates four Ipsen furnaces in Spokane and 12 more at its site in Portland, Ore.
Nitrex, a global provider of fully integrated heat-treating solutions and technologies, acquired G-M Enterprises, a manufacturer of vacuum furnaces. The acquisition is in line with Nitrex’s strategy to further expand its heat-treatment solutions while strengthening its products portfolio. For the past 30 years, Corona, Calif.-based G-M Enterprises has earned a reputation as a leading technological supplier of vacuum furnaces for customers in the aerospace, power-generation, energy, MIM and commercial heat-treating industries. According to Montreal-based Nitrex, the acquisition represents a great fit because both companies share the same goal of providing technologies that improve customer workflow and efficiency while maximizing the life span and quality of engineered parts and components.