Home » Signal Conditioners

Signal Conditioners

September 1, 2006

Eurotherm

The WV408-DC voltage/current input isolating signal conditioner and the WV428 thermocouple input isolating signal conditioner have been approved for use in hazardous area locations. Both models can now be installed directly in the Class 1, Division 2 (Groups A, B, C and D) hazardous locations.
www.eurotherm.com

I want to hear from you. Tell me how we can improve.

BNP Media Owner & Co-CEO, Tagg Henderson

You must login or register in order to post a comment.

IR Temperature Measurement for Metals Made Simple

Choosing and deploying the right sensor for Infrared temperature measurements on metal surfaces can be a complicated exercise. Most suppliers offer dozens of sensor options and some offer a range of IR cameras that could also be considered. It is easy to spend several thousand dollars on a sensor that does not measure accurately on a metal surface, but you can avoid this fate if you better understand four key technical issues.

Furnace Safety for the New Decade: NFPA 86 Yesterday to Tomorrow

This webinar begins with a brief trip down memory lane to marvel at early twentieth-century furnace technologies, commences with a look at the most recent changes made to the 2019 Edition of NFPA’s Ovens & Furnaces Standard, and ends with a crystal ball look at technologies that may unfold in the decade ahead.

Industrial Heating

2020 February

Check out the February 2020 issue of Industrial Heating, featuring an editorial on Nonferrous – Products and Their Processes, along with the Inspection and Maintenance Critical to Safe Fuel-Train Operation.

View More Create Account

Signal Conditioners

Eurotherm

Related Articles

Report Abusive Comment