The UNIPOWER solid-state power supply is a bench-top system with a unitized single module system, which has a quick-change inductor coil that simultaneously disconnects power and cooling circuits. Ratings vary with application and duty cycle requirements; however, the system is rated at 6 kW under full duty cycle conditions. Cooling requirements vary from 2 to 4 gpm depending on the application. The system includes high-speed fuses for fault protection, 0.95 input power factor under all operating conditions, and a +/-2% accuracy with +/-10% line voltage variance. It requires only a 3-phase, 480-volt input power and cooling water supply.